Description:

• Mfr Part Number: FSP200-50PL-B
• Features
• Complied with Flex ATX and ATX12V standard
• High efficiency and reliability
• Remote On/Off function
• Internal 12V DC fan included
• Noise Killer (Thermal fan speed control function)
• Low noise and ripple
• Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Approved by UL 1950, CSA C22.2 Level 3
• Input:
• Input Range: 90 ~ 132 / 180 ~ 264V AC, Manual Selection
• Frequency: 47 ~ 63 Hz
• Input Current: 5A (RMS) @ 115V AC, 3A (RMS) @ 230V AC
• Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
• Output:
• Totao Watts: 200 W
• +5V and +3.3V total output not exceed 75W
• +3.3V, +5V, and +12V total output cannot exceed 186.5W
• Dielectric Withstand: Input to frame ground 1800V AC for 1 second
• Efficiency: 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
• Rise Time: Less than 20ms
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
• MTBF: 100,000 hours on maximum load at +25°C degree
• Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm